While probably one the least talked about standards, and one that is often considered voluntary, the TIA-606-B labeling standard exists for a reason.
An unlabeled infrastructure results in an unmanageable mess that ultimately makes every reconfiguration and troubleshooting task a time-consuming, frustrating and costly tracing game of hunt and peck.
2016 年 6 月 22 日
Maximizing productivity in today's fast-paced workplace is essential. 无论是在安装新的光纤链路时，还是在排除现有网络故障时，越快找到故障的位置，您就能越快排除故障。但是当您面对一个集成了光纤、连接器和跳线的复杂网络时，这就说起来容易，做起来难了。
2016 年 6 月 16 日
So your customer has decided to deploy HDBaseT for ultra high definition video displays and digital signage. If you're already experienced in deploying a copper cabling infrastructure for IP-based Ethernet applications like voice and data, you have little to worry about.
But it's still important to know the basics and best practices required for HDBaseT performance and error-free video transmission, and what's required when it comes to testing.
2016 年 6 月 9 日
2016 年 6 月 2 日
2016 年 5 月 19 日
Over the past decade, we have seen significant advancements in the capabilities of fiber optic cabling--from expanded distances to speeds reaching 40 and 100 Gig.
While fiber loss requirements are getting tighter, efforts are also underway to increase fiber bandwidth carrying capacity with reduced fiber counts--all while following the roadmap to 400 Gig.
The Count Down
2016 年 5 月 12 日
While the smart people who install, test and certify network cabling plants know the importance of meeting standards performance parameters and ensuring application support, even the best of us can make mistakes that adversely impact the bottom line and customer satisfaction.
2016 年 5 月 5 日
With the need for increased speed and power over Ethernet (PoE) being addressed within IEEE standards, work within TIA must follow suit as the two standards bodies work hand in hand to ensure that the applications put forth by IEEE can be adequately supported by the cabling infrastructure.
Let's take a look at some of the recent and most significant standards activity within the Subcommittee and how they relate to standards development happening within IEEE.
2016 年 4 月 28 日
We repeatedly try to drive home the need to keep your tester up to date with the latest firmware, and for good reason. Not only do we want to make sure you don't miss out on the latest features that can help you test faster and more accurately, but as standards change, so must your tester.
2016 年 4 月 21 日
2 级 (OTDR) 测试的双向光纤链路测试不仅是工业标准和大部分制造商在保修时所需要的，也是了解链路的实际整体损耗的唯一方式。这是因为光纤连接器和拼接的损耗测量以及整体链路的损耗测量，都取决于测试方向。Testing a fiber link in one direction can give you different results then testing the same fiber link in the opposite direction.
2016 年 4 月 14 日