Battery life for the DSP-2000 CableAnalyzer

When fully charged, the battery will last around 8 hours. Fluke Networks enjoys a good reputation for battery life. If this drops to 4 hours, it is time to replace the battery. Please contact Us.

The battery inside the DSP-2000 is a NICAD battery. Although this can suffer from the memory effect, history has shown this not to be the case. Life is rated on the number of cycles. A cycle is where the battery is placed on charge, regardless of its battery status. You can expect around 500 cycles and typically around 2 years although we have seen them last up to 4 years.

In order to extend the life of the battery, the DSP will not charge the battery if the battery status is >75%. Only when the battery status drops below 75% will charging begin.

Part no. BP 7217

Do not use the NiMH battery used in the DSP-4x00 CableAnalyzer. It will not charge it correctly.

有限保修期和责任范围
Fluke Networks, Inc. (Fluke Networks) warrants its products to be free from defects in material and workmanship under normal use and service for one (1) year, beginning on the date of shipment. Link interface adapters (LIAs), parts, product repairs, and services are warranted for 90 days. This warranty extends only to the original buyer or end-user customer of a Fluke Networks authorized reseller, and does not apply to fuses, disposable batteries, or to any product which, in Fluke Networks opinion, has been misused, altered, neglected, contaminated, or damaged by accident or abnormal conditions of operation or handling. Fluke Networks 担保软件按其功能规格充分运行90天, 并且正确刻录在无缺陷的介质上。Fluke Networks 不担保软件没有错误或运行不会中断。

The battery is covered under warranty for 90 days from date of purchase.