布线发展史

HDBaseT for Ultra HD Video Displays and Digital Signage

So your customer has decided to deploy HDBaseT for ultra high definition video displays and digital signage. If you're already experienced in deploying a copper cabling infrastructure for IP-based Ethernet applications like voice and data, you have little to worry about.

But it's still important to know the basics and best practices required for HDBaseT performance and error-free video transmission, and what's required when it comes to testing.

2016 年 6 月 9 日

Fiber Optic Cabling Standards - On the Road to 400 Gig.

Over the past decade, we have seen significant advancements in the capabilities of fiber optic cabling--from expanded distances to speeds reaching 40 and 100 Gig.

While fiber loss requirements are getting tighter, efforts are also underway to increase fiber bandwidth carrying capacity with reduced fiber counts--all while following the roadmap to 400 Gig.

The Count Down

2016 年 5 月 12 日

Cabling Mistakes #6 - #7: Using Non-EF Compliant Cable Tester and Two-Cord

While the smart people who install, test and certify network cabling plants know the importance of meeting standards performance parameters and ensuring application support, even the best of us can make mistakes that adversely impact the bottom line and customer satisfaction.

2016 年 5 月 5 日

Cabling Standard Subcommittee Work-Hand in Hand with IEEE

With the need for increased speed and power over Ethernet (PoE) being addressed within IEEE standards, work within TIA must follow suit as the two standards bodies work hand in hand to ensure that the applications put forth by IEEE can be adequately supported by the cabling infrastructure.

Let's take a look at some of the recent and most significant standards activity within the Subcommittee and how they relate to standards development happening within IEEE.

2016 年 4 月 28 日

What's New with Versiv Version 4.6 Build 2?

We repeatedly try to drive home the need to keep your tester up to date with the latest firmware, and for good reason. Not only do we want to make sure you don't miss out on the latest features that can help you test faster and more accurately, but as standards change, so must your tester.

2016 年 4 月 21 日

SmartLoop Technology Just Got Smarter and Faster

2 级 (OTDR) 测试的双向光纤链路测试不仅是工业标准和大部分制造商在保修时所需要的,也是了解链路的实际整体损耗的唯一方式。这是因为光纤连接器和拼接的损耗测量以及整体链路的损耗测量,都取决于测试方向。Testing a fiber link in one direction can give you different results then testing the same fiber link in the opposite direction.  

2016 年 4 月 14 日

Save Time and Money with LinkWare Live

下午晚些时候,你的团队刚完成一项工作。Now it’s time to gather up the testers and head back to the office with the results. But if that's your white box truck back there sitting in miles of traffic, how much will it cost you?

2016 年 4 月 7 日

Developments on Fiber Connector End Face Inspection

The performance of an installed optical fiber link hinges on the condition of the connector end faces. Test suppliers have been pushing end face inspection for good reason – most service calls are due to problems with connectors. Standards bodies are busy making improvements to their documents on visual inspection. This work is being done in subcommittee 25 working group 3, the working group responsible for developing standards for customer premises cabling. Recent developments on end face inspection is the topic of this blog.

2016 年 3 月 31 日