布线发展史
说明的 Ethernet 线缆类别：简史
Millennials who entered the workforce between 2003 and 2016 are accustomed to the digital era: high-speed internet access, smartphones, online everything. And while they’ve definitely experienced advancements in technology during their lifetime, they may not be aware of just how far copper Ethernet cabling has come to make it all possible. We thought we’d start off 2022 with a little Ethernet history lesson for the younger generation and a walk down memory lane for those of us that have been in the industry a bit longer than we’d like to admit.
2022 年 2 月 24 日
2022 年 2 月 9 日
如何测试 SFP 收发器与网络线缆
Recently we have been getting questions about how to determine if an SFP (Small Form-factor Pluggable) transceiver is working. We refer to SFP generically here to represent a multitude of the various optical modules that are available. Fluke Networks fiber testers can be used to measure the light that is being put out by an SFP.
2022 年 1 月 21 日
为今天的光纤检测选择最佳的光纤范围
Contaminated connections remain the number one cause of fiber related problems and failures in data centers, campus, and other enterprise or telecom networking environments. But it’s not enough to just clean every fiber end face—there is no way to know if the end face is clean unless you inspect it.
2022 年 1 月 4 日
位于边缘的光纤与铜：为什么智能的生态建筑越来越多地选择光纤
For years, we’ve heard about FTTX making its way into the horizontal LAN — fiber to the desktop, fiber to the office, fiber to the enclosure, fiber to the zone, etc. Often referred to as “fiber to the edge” or FTTE, most of these deployments have traditionally been for high-security government environments or specialty applications or devices. Now, as bandwidth requirements continue to increase and the commercial real estate industry is trending towards smarter and more sustainable buildings, the question of using fiber vs. copper is more relevant.
2021 年 12 月 8 日
2021 年 12 月 1 日
您的光缆和测试仪是否已准备好用于 400G 以太网？
Driven by large hyperscale and cloud data center providers, advancements in signaling and transceiver technology have led to the development of next-generation transmission speeds. There are now multiple options available for 400G Ethernet applications over multimode and single-mode fiber with more on the horizon. And it doesn’t stop there—big players like Google, Facebook, and Microsoft are driving innovation to support 800 Gig and 1.6 Terabit applications, and the IEEE Beyond 400 Gig Ethernet Study Group is already defining objectives.
2021 年 9 月 28 日
插入损耗
What is Insertion Loss?
Insertion loss is the amount of energy that a signal loses as it travels along a cable link. It is a natural phenomenon that occurs for any type of transmission—whether it's electricity or data. This reduction of signal, also called attenuation, is directly related to the length of a cable—the longer the cable, the greater the insertion loss. Insertion loss is also caused by any connection points along a cable link (i.e., connectors and splices).
Insertion Loss Formula
2021 年 8 月 25 日
金属 LC 连接器：告别光纤测试参考线上的损坏闩锁
虽然视您所使用的组件类型而定，有许多不同类型的光学连接器，但 LC 连接器在网络行业已非常常见。
塑料 LC 连接器
使用塑料以插入的方式进行连接，连接后无需再管便可完美运行。但是，当需要反复进行连接和断开这些连接时，例如使用光纤测试参考线，外壳上的柔性闩锁经常由于反复弯曲而断裂。
2021 年 8 月 23 日
PoE 负载测试：先进的 PoE 系统故障排除
Since the original IEEE 802.3af Type 1 power over Ethernet (PoE) standard that delivered up to 15.4 Watts (W) was first introduced in 2003, the technology has evolved to include Type 2 (up to 30 W), Type 3 (up to 60 W), and Type 4 (up to 90 W). That means PoE voltage now supports everything from phones, Wi-Fi access points, and surveillance cameras, to laptops, digital displays, and even facility-wide LED lighting—all requiring various levels of PoE power.
2021 年 7 月 27 日
