Setup for Cable Testing - MicroMapper™ Pro
Cable testing with the MicroMapper™ Pro can be easily accomplished by following these setup steps:
步骤 1:Press the “SET” button and select the cable type using “UP / DOWN” arrows then hit “RETURN” to select
步骤 2:Press “SET” again to exit the menu
步骤 3:Connect a cable to the Coax or RJ-45 interface
步骤 4:Connect a Remote Identifier to the far end of the cable
步骤 5:Press the “TEST” Button
步骤 6:if the cable has a bad wiremap, there may be the option to use the “UP / DOWN” arrows to get additional information on the problem.
步骤 1:Press the “SET” button and select the cable type using “UP / DOWN” arrows then hit “RETURN” to select
步骤 2:Press “SET” again to exit the menu
步骤 3:Connect a cable to the Coax or RJ-45 interface
步骤 4:Connect a Remote Identifier to the far end of the cable
步骤 5:Press the “TEST” Button
步骤 6:if the cable has a bad wiremap, there may be the option to use the “UP / DOWN” arrows to get additional information on the problem.